1 alarm function: vibration type alarm trigger device, 110dB alarm signal output;
2 password lock: alarm cancelled or alarm protection implemented by password;
3 adjustable sensitivity: vibration trigger sensitivity third gear, can set up by their own;
4 low voltage warning function: when the battery voltage is low, will issue a prompt sound. The battery uses a 9V battery, which can be used for about 3 to 5 months.
5 Method of use: alarm is fixed on a bicycle frame, press the start button, after delay of 10 seconds the alarm will be in a state of alert, when someone touches the vehicle, alarm is sent out about 8 seconds sharp sound the alarm, and automatically enter a state of alert, again touch is again alarm, the user can closed in accordance with the code shown on the product.
1 Default code " ABCA"
2. Password modification: press a button for 2 seconds (Di), input the old password ( you will heart a 'DiDi' sound if correct, Di if error and exit operation), input new four password
(you will heart a 'DiDi' sound if correct).
Note: when the battery is removed, the password is restored to the default code
3 When consecutive input wrong password in four times, the system locks the keyboard to prohibit the operation, after 3 minutes to unlock.
4 deployment: press the B button for 2 seconds, you will hear "Di" by host, successful deployment, after delay 5 seconds will be in a state of alert.
5 lift: in the deployment or alarm state, input four password prompt "beep" twice, exit.
6.In the deployment of state, the host for the first time by vibration alarm is triggered, it will call for 5 seconds, if in 5 seconds it is triggered by vibrated again, the host will be continuous calls for 15 seconds.
7 low voltage detection: when the battery voltage is low, the host in every 1 minutes will prompte "beep", says the battery needs to be replaced.
8. The sensitivity adjustment: shock trigger sensitivity can be divided into three gear adjustment .In release state, press the C button you hear a "tick" sound, every 2 seconds after hear a "tick" sound, said set for a file; hold C button you hear a "tick" sound, afte every 2 seconds r you will hear "didi" twice, says set into second gear; Press the C button ,after hear "Di" ,you will hear"DiDiDi" says set into third gear (cyclic operation).